Zuhause> Blog> Reaction kettle module (weighing module) explosion-proof weighing module

Reaction kettle module (weighing module) explosion-proof weighing module

October 11, 2023

Reactor module

The specific description of the reactor module :
The reactor module can utilize multiple commands for precise adjustment of the operating state of the weightless scale, such as proportional adjustment (manual, automatic, gravity, volumetric) feeding and blanking.
The high-precision metering, real-time signal processing, measurement and filtering of the SIWAREXFTC reactor module ensure extremely high proportional control accuracy.
The function of the flushing flowmeter flushing flowmeter is realized in the "flowmeter" operating mode. The calculation of general process values ​​is carried out in the SIWAREX module: eg flow and delivery. The setting and operation of the scale involved in the application can be done through parameter settings and commands. The SIWAREXFTC reactor module monitors the status during the weighing process and informs the operator of any irregularities. The optimized exchange of data in SIMATIC allows direct evaluation of the load cell signals in the PLC program.
SIWAREXFTC has been calibrated at the factory. This means that the theoretical calibration of the scale can be performed without the need to adjust the weight, and the module can be replaced without recalibrating the scale. When using the "Active Bus Module", it can also be replaced during operation.
Siemens reactor module U dual channel module 7MH4950-2AA01; Siemens reactor module U single channel module 7MH4950-1AA01
SIWAREXU weighs electronic modules; SIWAREXU is a versatile multi-function reactor module for a wide range of weight and force measurements. The compact modules are easy to install in all SIMATIC automation systems. Get the data information of SIWAREXU directly in SIMATIC.

The reaction vessel module (weighing modules) weighing module explosion reactor module features:
1. Digital weight display;
2. High precision, high safety load cell with good stability of the installation module;
3. It can be applied to stock control management of raw materials such as liquid and powder;
4. According to the actual site status, use 3 or 4 sets of sensors;
5. Cooperate with the optional quantitative control system to achieve quantitative automatic feeding or quantitative automatic discharging;
6. There are general non-explosion-proof and explosion-proof specifications for purchase;
7. The weight signal of the reactor module installed at the ground of the tank is transmitted to the junction box. In the junction box, the angular difference can be adjusted according to the load condition of various reactor modules, and the collected weight signal is sent to the weighing end or the weight transmitter. The weighing terminal or weight signal is processed into corresponding weight data.
8. The module adopts a combination of floating and semi-floating. The weighing and measuring system formed by using the sensor can automatically measure the weighing data, store the computer and carry out weighing data management.
9. The system has fully automatic, automatic and manual functions. In either case, there is a mandatory function. This feature can immediately start or stop an operation to cope with some unexpected events, making the system more resilient.
10. Fully automatic: automatic mode with computer monitoring and all data functions. (optional)
11. Auto: When the computer fails, the computer is cut off, and under the control of the weighing unit and the logic unit, the original batching program and the predetermined precision can still be operated. The recipe will be entered by the on-site waterproof keyboard.
12. Manual: Remove the interlocking function of the system, start the feed pump in a single unit and use the function of the weighing unit to perform the batching operation. This method is generally used when testing and emergency.
13. When the system receives the instruction to request ingredients in the automatic mode (including fully automatic), the alarm bell rings...

Reactor module classification:
(1) FW static load reactor module: mainly suitable for static load weighing occasions with small lateral force.
The static load reactor module can be easily installed on containers of various shapes.
(2) CW dynamic load reactor module: It is mainly suitable for mechanical devices that can withstand horizontal forces such as assembly lines, conveyor belts, etc. In addition, the dynamic load reactor module can also be used for the modification of mechanical platform scales.

Kontaktiere uns

Author:

Ms. Zoe Zhong

Phone/WhatsApp:

+86 18617178558

beliebte Produkte
You may also like
Related Categories

Mail an Lieferanten

Fach:
E-Mail-Adresse:
Nachrichten:

Your message must be betwwen 20-8000 characters

Kontakten

  • Telefonnummer: 86-186-17178558
  • Whatsapp: +86 18617178558
  • E-Mail-Adresse: sales07@ynxantenna.com
  • Firmenadresse: Room #101,201,301,5BLDG , No.4 of XinWuCun New Area ,Shabo community Maluan Street Pingshan District, Shenzhen ,Guangdong , China, Shenzhen, Guangdong China

Send Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

senden